The Hellbound Web
-------------
NECA

 Hellraiser Figures Series I

Pinhead
Sculpted by Kyle Windrix
7" tall
Plastic

First model of NECA's Cenobite line.
Package with:
A section of the Lament Configuration (doubles as stand)
A miniature Lament Configuration
A knife
Chatterer
Sculpted by Kyle Windrix
7" tall
Plastic and metal

Second model of NECA's Cenobite line.
Packaged with:
A section of the Lament Configuration (doubles as stand)
A chained weapon
Additional chain
CD
Sculpted by Kyle Windrix
7" tall
Plastic

Third model of NECA's Cenobite line.
Packaged with:
A section of the Lament Configuration (doubles as stand)
Two CD's
Four Additional weapons
*
Chatterbeast
Sculpted by Shawn Nagle
7" tall
Plastic

Fourth model of NECA's Cenobite line.
Packaged with:
A section of the Lament Configuration (doubles as stand) and a severed head and severed arm
Wire Twin
Sculpted by Sam Greenwell
7" tall
Plastic

Fifth model of NECA's Cenobite line.
Packaged with:
A section of the Lament Configuration (doubles as stand)
A hook
A bloody knife
Two alternate hands: open and closed
*
Stitch
Sculpted by Kyle Windrix
7" tall
Plastic

Sixth model of NECA's Cenobite line.
Packaged with:
A section of the Lament Configuration (doubles as stand)
A knife
Her 'mouth gag' as seen in HR6
*
Wire Twin Set
Sculpted by Sam Greenwell
7" tall
Plastic
 
Set limited to 10,000 pieces. Originally available through comic shops and specialty retailers who use Marz Distribution as their distributor. The Twins in this set have different head sculpts and unique body details.
Also included in the set is Torso from Inferno.
At the request of Marz, one set per case will have a "blood spattered" paint deco.

*
Pewter Pinhead
Sculpted by Kyle Windrix
7" tall
Pewter

A Collector's Club exclusive model in NECA's First Series, exclusive to San Diego Comic Con and Wizard World Chicago. Limited Run of 3000 worldwide.
Packaged with:
A pewter-cast section of the Lament Configuration (doubles as stand)

 Hellraiser Figures Series II

Hellbound Pinhead
Sculpted by Kyle Windrix
7" tall
Plastic

First model of NECA's Second Series.
Packaged with:
A section of the Pillar of Souls
A Lament Configuration


Skinless Julia
Sculpted by Kyle Windrix
7" tall
Plastic, latex

A model in NECA's Second Series.
Packaged with:
A section of the Pillar of Souls
A human heart
Pair of skinless arms
Bandage "cowl"
Dress
 
Butterball
Sculpted by Kyle Windrix
7" tall
Plastic

A model in NECA's Second Series.
Packaged with:
A section of the Pillar of Souls
A different sculpt head (no sunglasses, stitched eyes)
11 accessories which come out of his belt and fit in his hand

Barbie
Sculpted by Kyle Windrix
7" tall
Plastic

A model in NECA's Second Series.
Packaged with:
A section of the Pillar of Souls
Swappable head
Shaker
Flames

Angelique
Sculpted by Kyle Windrix
7" tall
Plastic and metal

A model in NECA's Second Series.
Packaged with:
A section of the Pillar of Souls
A Lament Configuration

*
Surgeon
Sculpted by Shawn Nagle
7" tall
Plastic and metal

A model in NECA's Second Series.
Packaged with:
A section of the Pillar of Souls
Six bloody tools attached the the chains (real metal) that hang from his clothes.
All six can be easily removed and replaced, and placed in his hands.
*
Chatterer II
Sculpted by Kyle Windrix
7" tall
Plastic and metal

A Collector's Club exclusive model in NECA's Second Series. Limited Run of 3000 worldwide.
Packaged with:
A section of the Lament Configuration (doubles as stand)
A chained weapon
Additional chain
Pillar of Souls
Sculpted by Rudy Garcia
9" tall
Plastic

The Special Feature in NECA's Second Series constructed from sections found with each figure.

 Hellraiser Figures Series III

Pinhead III
Sculpted by Kyle Windrix
7" tall
Plastic

First model of NECA's Third Series.
Packaged with:
A section of Leviathan
Belt accessories: straight knife, saw, and curved knife
The Female
Sculpted by Kyle Windrix
7" tall
Plastic

A model in NECA's Third Series.
Packaged with:
A section of Leviathan
A scythe
A bloody knife
Bloodline Twins
Sculpted by Sam Greenwell
7" tall
Plastic

A model in NECA's Third Series.
Packaged with:
A section of Leviathan

Frank
Sculpted by Shawn Nagle
7" tall
Plastic

A model in NECA's Third Series.
Packaged with:
A section of Leviathan
A rat
A knife
 
The jacket itself is a separate piece of soft plastic, allowing it to open the front for a better view of his bloody shirt.
Dr Channard
Sculpted by Kyle Windrix, Ed Repka, Oliver Brig
18" tall
Plastic

Box set released alongside NECA's Third Series.
Packaged with:
Three sets of hand snakes. Each set consists of three separate tentacles ending in their own unique torturous device.
One alternative head
Display base depicting the top of the Cenobite Creation Chamber and a two-part tentacle of Leviathan.
Leviathan
Designed by ?
18" tall
Plastic

The Special Feature in NECA's Third Series constructed from sections found with each figure.
Light up feature: a battery-powered box in the middle allows it to light up from each side.
Includes stand-up base depicting the Labyrinth. NECA Schematics here.

18" Electronic Figures

Pinhead
Sculpted by Kyle Windrix
18" tall
Plastic

Large Pinhead electronic figure with motion activated sound chip that says four phrases.
Chatterer
Sculpted by Kyle Windrix
18" tall
Plastic

Large Chatterer I electronic figure with motion activated chatter action with "real" chattering teeth.

Statues

Pinhead
Sculpted by Kyle Windrix
15" tall
Resin and metal pins

Limited Edition Statue - 1500 worldwide (+150 Artist Proofs).
Dr Channard
Sculpted by Kyle Windrix, Ed Repka, Oliver Brig
22" tall
Resin

Limited Edition Statue - 500 worldwide.

Play-Set Diorama: "Cenobite Lair"

Cenobite Lair
Built by ?
9" tall, 11.5" across, 9.5" deep
?
 
This highly detailed play-set diorama comes complete with hooks, chains, the pillar, and all the gory detail. Each play-set will come packaged with a special sketch of Clive Barker's original Cenobite designs.
Each sketch will be hand numbered and signed by Clive Barker.
A limited edition of 5000 sets. NECA Schematics here.
 
 

Busts

Chatterer III Bust
Model by Gary J. Tunnicliffe
16" tall and 19" wide
Resin & wire
Weighs over 13 lbs.
 
Cast from actual film mask provided by Gary J. Tunnicliffe, special FX and makeup designer for the Hellraiser films.
Includes a Certificate of Authenticity signed by Gary J. Tunnicliffe. Limited to 250 pieces worldwide.
 
Pinhead Mini-Bust
Sculpted by Kyle Windrix and Ray Santoleri
6" tall
Resin and metal pins
 
Limited Edition NECA Pinhead Mini-Bust. Limited to 2500 pieces worldwide (+250 Artist Proofs).

*

Lament Configuration Prop Replica

Lament Configuration Prop Replica (Regular)
Etching artwork and box detail by Gary J. Tunnicliffe
3" x 3" x 3"
Wood, Brass
 
Lament Configuration Limited Edition Prop Replica. Constructed of solid wood and hand cut brass etchings.
Limited to 2500 pieces worldwide. NECA publicity sheet
*
Lament Configuration Prop Replica (Deluxe)
Etching artwork and box detail by Gary Tunnicliffe
3" x 3" x 3"
Wood, Brass
 
Lament Configuration Limited Edition Prop Replica with display case and Gary J. Tunnicliffe signed Certificate of Authenticity. Constructed of solid wood and hand cut brass etchings.
Limited to 500 pieces worldwide. NECA publicity sheet
 *

T-Shirts

Hellraiser T-Shirt
Designed by ?
Cotton
 
Officially licensed Hellraiser T-Shirt by NECA.
*
Hellraiser T-Shirt
Designed by ?
Cotton
 
Officially licensed Hellraiser T-Shirt by NECA.
*
Hellraiser T-Shirt
Designed by ?
Cotton
 
Officially licensed Hellraiser T-Shirt by NECA, included only in the Collector's Club Membership pack, along with the exclusive figure Chatterer II.
*

Miscellaneous Items

Lament Configuration Stands
Designed by ?
3" x 3"
Plastic

Six  figure stands can be assembled to form your own Lament Configuration puzzle box.

*

*

Laser Engraved Acrylic Paper Weight
Designed by ?
2" x 2" x 2"
Acrylic
 
This laser engraved acrylic Hellraiser Puzzle Box paperweight, features the Lament design on the outside and a laser engraved Pinhead in the center.
Comes seated in a blue satin cushion, in a window box package.

*

Pinhead Bobble Head
Sculpted by ?
8" tall
Plastic and metal
 
Pinhead Bobble Head from NECA's Head Knockers Series. Real metal pins.
*
Hellraiser Lunchbox & Thermos Flask
 
Metal and plastic
 
Officially licensed Hellraiser lunchbox and thermos flask by NECA.
*
Hellraiser Stein
 
Ceramic
 
Officially licensed Hellraiser Stein by NECA.
*
Hellraiser Shot Glass
 
Glass
 
Officially licensed Hellraiser Shot Glass by NECA.
*


<<BACKHOME ContributeFAQTOC