The Hellbound Web
-------------
Models

 Alvarez Wax Models 

Wax Sculpture of Pinhead
Sculpted by Henry Alvarez
1:1
Wax

Created for display at conventions in the early 90s. Sold on ebay.
*

 Amaquest 

Superdeformed Pinhead Cenobite
Sculpted by ?
?" tall
Vinyl

A large-headed Pinhead trying to solve a Rubik's Cube.
*

 C&G Coldcast 

CD Cenobite
Sculpted by Chris Forward
1:6
Porcelain

The CD Cenobite about to throw a CD.
*
Pinhead Morphing
Sculpted by Neil Morrell
1:3
Porcelain

Presumably, Pinhead and Spenser re-joining.
*
Uncle Frank in Chains
Sculpted by ?
1:6
Porcelain
01792 817660

Frank strung up in chains by the Cenobites.
*

 The Character Shop 

Hellraiser Commemorative Plaque
Sculpted by Mike Hill
?" tall
Resin

Sculpted for the 1997 Monster Modelfest in Boston, celebrating Hellraiser's 10th anniversary.
*

 Creative Castings  

Terri Cenobite
Sculpted by ?
1:?
?

The Terri Cenobite smoking.
*

 Dimensional Designs 

Pinhead Bust
Sculpted by Harry Inman and Chris Choin
1:2
Resin

A 6 1/2 inch bust of Pinhead with 130 insertable pins.
*

 Effective Models, Inc. 

The Wall Walker
Sculpted by Jason Brookes and Guy Conrad
1:4
Resin

The Engineer constructed from 4 pounds of solid resin.
*

 Faceworks 

Pinhead Wall Mount
Sculpted by ?
1:1
Fiber-Glass and Latex

A Pinhead face to hang on the wall.
*
Chatterer Wall Mount
Sculpted by ?
1:1
Fiber-Glass and Latex

A Chatterer face to hang on the wall.
*
Butterball Wall Mount
Sculpted by ?
1:1
Fiber-Glass and Latex

A Butterball face to hang on the wall.
*

 Fiction and Fantasy Models 

Pinhead Bust
Sculpted by ?
1:1
Resin

A Pinhead bust with real nails.
*

 Fewture 

Skullbite
Sculpted by Yasushi Nirasawa
1:6
Resin
Creature Core Series

Pinhead's skull with a Lament Configuration in the center.
*

 G-Force 

Pinhead Bust
Sculpted by Anthony Veilleux
1:6
Resin
Model GF116

Pinhead emerging from concrete, holding a bloody knife.
*

 Image Animation

Pinhead Bust (Blue Eyes)
Sculpted by Bob Keen
1:1
?

One of 6 (?) busts sculpted as gifts for film executives at the Cannes Film Festival in 1986 or 1987. One of them is signed by Doug Bradley. One of them is in the Orange County Planet Hollywood. Another may be in the Blackpool Tower Museum. A fibre glass bust cast from this model and mounted on a wooden base was sold in a Bonhams auction for between £800-£1000 in 1993 or 1994.
*
*Pinhead Bust (Black Eyes)
Sculpted by Bob Keen
1:1
?

See above. A scan of a magazine ad for Planet Hollywood shows on of these busts.
*

 Invaders Models

Hellraiser Wall Plaque
Sculpted by Paul Fay
11"x7" (27.9 cm x 17.8 cm)
Resin

This solid resin plaque features The Chatterer, Pinhead, Butterball, the Female Cenobite, and the Engineer arranged around the Hellraiser logo.
*

 Jayco Hobbies

Uncle Frank
Sculpted by Mark Van Tine
1:6
Resin

Skinless Frank holding the Lament Configuration.
*

 Mirage Models

Pinhead Bust
Sculpted by ?
1:1
Resin

Bust of a somber Pinhead.
*

 N&T Productions  

Pinhead
Sculpted by ?
1:3
Resin

Sold in both a limited edition pre-built version and a non-limited kit.
*
Pinhead
Sculpted by ?
4" tall (10.2 cm)
?
Cheesechasers

Pinhead as a mouse holding the Lament Configuration.
*

 Netherworld 

Dr. Channard
Sculpted by Paul Komoda
1:6
Resin

A highly detailed sculpt of the Channard Cenobite suspended over a Lament Configuration-inspired base.
*
Skinless Julia
Sculpted by Paul Komoda
1:6
Resin

Skinless Julia standing over a corpse.
*

 Night Life Productions

The Pursuader Cenobite
Sculpted by Jim Van Norman
1:6
Resin

An original Cenobite.
*

 Pacemaker UK Ltd.

Smellraiser
Sculpted by ?
5.5" tall (14 cm)
Resin
Limited edition production run: 5000

A turd version of Pinhead, part of The Turds special edition range.

"Now this is one scary sh*t – the hand painted figurine of Smell Raiser is trying to become the most powerful Turd in the Turd World by hunting down the awful stench of the Phantom Turds. He’s armed with nothing more than a powerful sacred toilet roll, and the hook toilet chain from smell. Complete with log book, collector’s date of dump certificate with individual coding, and top turd tips - don’t let his pong power get too strong."
*

 Piranha Studios

Spike
Sculpted by ?
3" tall (7.5 cm)
Resin
Bad Taste Bears Model 126

A bear version of Pinhead, part of the Bad Taste Bears range.
*

 Sassy's Satellite 

Angelique
Sculpted by ?
1:4
Resin

A bust of Angelique produced by HR4's special F/X artist.
*
Cenobite Twins
Sculpted by ?
1:4
Resin

A bust of the conjoined twins from HR4 produced by the special F/X artist.
*
Pillar of Souls
Sculpted by ?
1:4
Resin

HR3's pillar cast from the movie's original maquette.
*

 Screamin' 

Pinhead
Sculptured by Thomas Kuntz
1:4
Vinyl
Model 500

Pinhead holding the Lament Configuration.
*
Limited Pinhead
Sculptured by Thomas Kuntz
1:4
Vinyl
Model ?

Pinhead holding the Lament Configuration. Glow-in-the-dark variant limited to 200.
*
Chatterer
Sculpted by Thomas Kuntz
1:4
Vinyl
Model 800

The Chatterer holding a chain.
*
Limited Chatterer
Sculpted by Thomas Kuntz
1:4
Vinyl
Model ?

The Chatterer holding a chain. Glow-in-the-dark variant limited to 100. Came with a certificate signed by Nicholas Vince.
*
Butterball
Sculpted by Jeff Brower
1:4
Vinyl
Model 900

Butterball pulling his wound open.
*
The Female Cenobite
Sculpted by Jeff Brower
1:4
Vinyl
Model 1000

The Female Cenobite offering a hand.
*
Pinhead
Sculpted by Jeff Brower
1:4
Vinyl
Model 1200

Pinhead from HR3 in front of an alter.
*
Pinhead
Sculpted by Jeff Brower
1:6
Vinyl
Model 1250

Screamin's third Pinhead kit, portraying him stepping over a corpse, holding its heart impaled on a hook.
*
Dr. Channard
Sculptured by Jeff Brower
1:4
Vinyl
Model 1700

The Channard Cenobite with arms outstretched.
*
Pistonhead
Sculptured by ?
1:4
Vinyl
Model ?

The JP Cenobite, nicknamed "Pistonhead" weilding a baton.
*
Camerahead
Sculptured by ?
1:4
Vinyl
Model ?

The Camerahead Cenobite with hand held out.
*
Lifesize Puzzle Box
1:1
Vinyl
Model 9100

A replica of the comic series Lament Configuration.
*

 Sol Models

Pinhead Cenobite
Sculpted by ?
1:6
Resin

Pinhead from HR3 attacking. Comes with metal pins.
*

Toy Maker Studios

Angelique
Sculpted by Mike Regan
1:1
Resin

A lifesize bust of Angelique sculpted by a member of the special effects team that works on the current Hellraiser movies.
Limited to only 25
To purchase contact: Toy Maker
*

 Venus Models  

Superdeformed Butterball Cenobite
Sculpted by Martin Herrick
?" tall
Resin

A large-headed Butterball eating a chicken leg. Created to as a companion for Amaquest's Superdeformed Pinhead model.
*

 XConcepts 

Pierce
Sculpted by ?
?" tall
?
Tech Dude Model 65

A Pinhead-inspired Tech Dude collectible.
*


<<BACKHOME ContributeFAQTOC